EASY Prime FAQs
Primers are used to allow non-porous paving such as porcelain to be laid onto a wet sand & cement base. Without this layer of ‘adhesive’, porcelain tiles can easily pop-off the mortar.
Yes, and it has become more necessary with thinner paving. Using a primer increases bond but also eliminates the chances of reflective staining. (a phenomenon where the base material can be visible by its shape as certain minerals are drawn through the stone)
There is no exact answer due to variations of weather and temperatures, but you can expect to see a mixed bag last several hours.
The primer needs to be at least 2mm thick and cover the entire surface of the back of the tile. It is also very important that the tiles are not disturbed by being walked on for at least 24 hours after being laid.
Yield is the sum of the mix after the water is added to the Prime powder. Adding 2 litres of water to 5kg of powder yields 4 litres of product.
Yes, but do not apply when air or ground temperatures are forecast to be below 5ºC at any time during the first 24 hours after application.
Store in ambient, dry areas for a maximum of 12 months.