EASYCare Deep Clean Application Types

APPLICATION TYPES DEPENDING ON USAGE:

SHAKE WELL BEFORE USE

  • USE AS A CLEANER
  • Powerful and effective degreasing cleaner
  • For use on concrete, stone, marble, granite, terracotta, tiling, paving, PVC, timber decking.
  • Does not alter the appearance of natural stone, granite, marble etc.
  • Fast acting
  • Low odour
  • Concentrated
  • Biodegradable
  • Removes organic soiling from drives and patios
  • Continues to work for weeks after use so the surface can stay cleaner for longer.

Can be used neat on heavy contamination or can be diluted by adding 1 part product with up to 10 parts water depending on the staining to be removed.

Using a spray or brush apply the Deep Clean liberally and allow to act for 1-2 minutes for lightly soiled surfaces, or 5-10 minutes for heavily soiled surfaces.

For removing deep penetrating lubricating oil and stains, it may be necessary to apply the product twice allowing 10 minutes between applications. Agitate with a firm bristle brush and rinse down thoroughly with clean water.

For best results on drives, patios and block paving use a pressure washer when rinsing.

USE AS A SEALER REMOVER – USE NEAT AS SUPPLIED

Deep Clean can be used to remove over-applications of water-based sealers such as EASYSeal SSP, Ultimate, Sandstone and Slate & Limestone. This will only remove surface product and not that which has been absorbed. Using a spray or brush apply the Deep Clean liberally and allow to act for 15-20 minutes. Scrub vigorously with a firm bristle brush and leave a further 10 minutes. Rinse down thoroughly with clean water. Repeat the application as required.