Gravel Hold Product Insight

Since the launch of Gravel Hold, we’ve learned more about how it performs in real-world conditions, and a few key insights can help you get the best possible results.


Application Matters

Using too much Gravel Hold at once can actually slow down the curing process, sometimes significantly. Both aggregate type and weather conditions play a major role in how effectively the product sets.


Stone Type & Preparation

Larger or more rounded stones are the most challenging, as they offer fewer contact points for bonding. To ensure a strong, lasting finish, always use clean, dry aggregates — this simple step can make all the difference.


Temperature Awareness

The chart below highlights the average overnight temperatures in London for 2025 (with December’s figure taken from 2024 for comparison).

January through March temperatures were below the recommended minimum of 5°C.

November is only just above that threshold at 6°C, meaning extended curing times are likely.


Cold Weather Considerations

As outlined in the product instructions, cooler temperatures will extend curing times. This is especially important to communicate to customers during late autumn and winter months.


Water-Based vs. Epoxy

Unlike epoxy resins, Gravel Hold is water-based. It won’t cure properly if applied too thickly or if temperatures remain low. For best results, apply in thinner layers and allow each to cure fully before adding the next.


Seasonal Recommendation

For optimal performance, spring and summer remain the best times to apply Gravel Hold — when temperatures are consistently within the ideal curing range.


Gravel Hold Weather Information (2025)

Gravel Hold Weather Information