EASY Grout FAQs
Mix Consistency
To ensure the powder is mixed consistently with clean water and forms a smooth, lump-free paste.
Clean water.
A smooth, lump-free paste.
Because it introduces air bubbles, which can affect the surface finish.
They can affect the surface finish.
To avoid any manufacturing variations.
Joint Preparation
To ensure consistent grout depth and appearance.
Any adhesive residues.
It creates irregularities in grout depth and consistency, which may result in shade variation.
Irregular grout depth, inconsistent grout consistency and possible shade variation.
Installation
This product is compatible with all paving products, making it a versatile choice for various projects. Being water-based it is easy to use and environmentally friendly, ensuring that both professionals and DIY enthusiasts can achieve great results.
A very light shower will not affect the application however too much rain will. Ideally apply in dry weather.
The paving joint needs to be a minimum of 10mm deep
Yes, 3mm
Yes, but only if it is a light shower.
Whilst you can use EASYGrout on natural stone, extra care should be taken when doing so as the porous nature of this type of paving can lead to issues with residue staining. The removal of grout residue can cause damage to some surfaces if a grout residue cleaner is used. Contact support@azpects.co.uk for further assistance.
No. This product is not suitable for this application. The common product for this is Kiln Dried Sand.
Yes, you can ‘top-up’ low joints with more grout.
Yes. Azpects Porcelain Sealer would be suitable.
Yield is the sum of the mix after the water is added to the grout powder.
Some paving will get very hot in direct sun. It is highly recommended that you refrain from using EASYGrout in summer when the heat of the tiles is hottest. The best time to grout is either early morning before the sun heats the paving surface or in the evening when things are generally cooler.
Baked-on grout can be removed, but it can be a time-consuming process.
A good rule of thumb is only grout when tiles are cool to touch.
Variations in mixing, joint preparation, cleaning, finishing, substrate, tile type, service conditions and moisture.
By applying the grout consistently at every stage of installation.
High-speed mixing, over-wetting during cleaning and inconsistent finishing.
Because moisture significantly affects grout curing and final colour.
It influences drying, moisture retention and shade variation.
Because consistent application reduces the risk of colour variation.
That joints are clean, consistent in depth and free from adhesive residue.
Incorrect cleaning methods or residues can alter the appearance.
Because of differences in drying rates and moisture retention.
Faster drying generally produces lighter shades, while slower drying produces darker shades.
It can create inconsistent surface texture and visible shade variation.
Tile Surface Cleaning & Joint Finishing
Excess water can alter the water content of the grout, leading to higher cement concentration and a lighter surface appearance.
It may increase cement concentration at the surface, producing lighter shaded areas.
It disturbs the surface finish, opens the grout texture and creates a coarser, darker shade.
Only when the grout has started to set but is still workable.
Different finishing methods alter surface texture and moisture content, causing shade variations.
To ensure an equivalent degree of dryness and surface texture across all joints, reducing shade variation.
Shade variations are likely.
General Surface Maintenance
To avoid affecting the appearance of the grout.
They may affect the appearance of the grout.
Because residues can accumulate in joints and affect appearance, especially when exposed to moisture.
Inconsistent application or excessive concentration may alter the appearance of the grout.
Service Conditions
Because different levels of wetting affect drying and grout colour.
Frequently wetted areas remain damper and appear darker.
It causes shade variation due to retained moisture.
Because moisture is retained within the cured grout joint.
Tile Type & Finish
Because they absorb more moisture from the wet grout.
They increase moisture absorption.
Because they absorb moisture differently from less porous surfaces.
It influences moisture absorption, affecting shade variation.
Substrate Type
It affects drying rates within grout joints.
Because grout dries more slowly over denser or impermeable sections.
Because grout dries faster over porous, drier sections.
It influences how quickly moisture leaves the grout.
Troubleshooting
This due to dye from the grout being left on the surface after cleaning. Failure to regularly replenish the water in the cleaning bucket is a major factor. It is best practice to wash the area with running water once the joints have firmed up to ensure all remaining contaminants are removed. If it is too late and you have grout stains, it is possible to clean these by scrubbing vigorously using a stiff brush with plenty of clean water. Any hardened excess grout can be removed using EASYCare Grout Residue Cleaner. For staining on other paving types, contact support@azpects.co.uk
Green joints signify an algae build-up. Wash the paving with Azpects Algae Cleaner & Remover as and when required.
Red joints are due to a form of algae that sits on the surface of the joint. This can be treated with Azpects Algae Cleaner & Remover.
White joints are usually due to an efflorescence build-up on the surface. This generally is a result of excess water being left on the joint surface after the final cleaning stages. Lime from the cement is drawn up from the wet grout and dries as a white powder. This can be cleaned with Grout Residue Cleaner or EASY Mortar Stain & Calcium Remover if the paving is suitable. Contact support@azpects.co.uk for further assistance.
Variations in the density or porosity of the surface beneath the tiles will encourage some areas of the grout joints to dry out at a different rate to others, usually illustrated where darker areas of the grout are laid over dense or impermeable section of flooring, whereas lighter shades will be evident over the more porous and drier sections of the substrate flooring.
If EASYGrout is still soft days after installation, it signifies that the mix had too much water added. It can be possible that as excess grout is moved around the paving, and this grout will look normal, but it actually contains very little powder resulting in a very weak joint.
This is down to a slight settlement of the paving area. Grout itself cannot move or change shape, but the paving area has been made up and may see some settlement in its early days. Apply some fresh grout to the cracked areas and wipe smooth.
EASYGrout has been highly modified to make it a slurry product. It also needs to cure fairly quickly so additives help this happen. Grout will, stiffen up if left in the tub after mixing. For a short time, it can be made fluid by stirring then pouring.
Sometimes, darker colours of grout powder absorb more water than lighter colours, so to help with fluidity, the water amount can be increased to 1000ml per 5kg bag. This is usually sufficient to make the grout more fluid.
On odd occasions, the amount of grout per bag can be over or under the 5kg which will affect the stiffness of the product.
You should only add water to grout at point of first mix. Do not try to revive grout which has hardened as this will only dilute the strength and colour.
General
This is a fast-setting product and will begin curing once mixed and will set hard within an hour. Full cure may take up to 24 hours.
Keep out of direct sunlight and protect from frost in original container.
18 months from date of manufacture
See our website Stockist Locator
EASYGrout should be stored inside in a dry environment away from heat sources.
Unopened bags of EASYGrout can be stored for later use but must be discarded after 18 months.
Yes, providing you mix subsequent batches identically to avoid variation of colours.
Yes, a component of cement is lime. It dissolves easily in water (water soluble) and drastically changes the pH of water increasing the alkalinity (pH 11-13), which causes burns (just like an acid burn) on fish and kills fish and other aquatic life.
It is advisable to keep pets off the jointed area until the application is complete.
If used correctly, the product will perform as intended. We cannot guarantee the product completely due to the various installation techniques and site conditions.
This depends on the joint dimensions. See the online calculators to work out how much you will need for your project.
No, when cured, EASYGrout is non-permeable
Yes, providing the minimum temperature warnings are adhered to. Do not use EASYGrout if temperatures fall below 5’C in the first 24 hours after application.
Because application methods and environmental conditions influence the curing process, causing localised variations in shade and colour that are beyond the manufacturer’s control.
Mix consistency, joint preparation, tile surface cleaning and joint finishing, general surface maintenance, substrate type, service conditions, and tile type and finish.
No. The document explains that these variations are caused by application and environmental factors beyond the manufacturer’s control.
To explain the factors affecting grout colour consistency and provide guidance for maintaining a consistent appearance.
Consistency throughout every stage of the installation process.
Because differences in application can cause colour variation.
The type of tooling, the amount of moisture introduced during cleaning and the finishing time.
It helps achieve a smooth, clean-edged finish without causing shade variation.
Shade variation in the hardened grout may occur.
Yes, in some cases using Azpects Grout Residue Cleaner.
Azpects Grout Residue Cleaner.
Natural efflorescence caused by lime released during cement curing.
Because weathering gradually washes away the lime.
Colour variation and cracking along the length of a joint.
Improper product application, excessive water after cleaning or trapped moisture beneath the grout.
No
Efflorescence
A white surface deposit caused by moisture carrying soluble salts to the surface.
Because soluble salts are deposited on the surface as moisture evaporates.
Water or moisture moving through the grout.
Because they contain more free calcium compounds that can be carried to the surface during curing.
Free calcium compounds.
Should you do anything ?
It is often reasonable to wait.
Rain and normal weathering may remove much of the residue.
When deposits become less frequent or if removal is required.
EASYCare Grout Residue Cleaner.
Yes. Moisture in the joint may cause more efflorescence to appear.
True or False ?
False
True
True
False
True
False
True
False
True
True