EASYSeal Sandstone Enhancer & Sealer FAQs
Problems associated with water-based protectors are few, but the most common ones are over application and failure to remove excess. An over application will result in a patchy, uneven finish which may be slippery. It may also dry opaque and leave white lines. The remedy for this is to use EASYCare Deep Clean. Avoid this mistake by wiping the surface after application using a towel or similar cloth to remove excess.
Another reason for white marks could be that the surface was not cleaned of dust thoroughly and this has become trapped within the liquid. Again, Deep Clean will be needed to remove this.
Keep out of direct sunlight and protect from frost in original container.
24 months from date of manufacture
This is suitable for concrete and natural stone paving.
No, use as supplied.
Yes, contact info@azpects.co.uk to request a sample.
Up to 25m² for one coat depending on surface porosity. Coverage will vary dramatically according to the porosity of the paving.
For best results, apply to dry paving.
Depending on various factors, reapplication may be necessary EVERY ONE TO TWO YEARS.
Yes
Avoid foot traffic for 8 hours after dry. Avoid vehicular traffic for 3 days.
In its normal state, the product is stable. It is however very toxic to fish and other aquatic life.
Keep children and pets/animals away until process is complete, and surfaces are dry.
Yes, surfaces should be clean and free of algae etc.
Yes, contact us at info@azpects.co.uk